Back to top
Send SMS Send Inquiry
+918068092754
Home » Products » Hardox Plate » Hardox 500 Plate

Hardox 500 Plate

Hardox 500 Plate
Hardox 500 Plate
Send Inquiry
Product Code : 06
Price And Quantity
  • Minimum Order Quantity
  • 1000 KG
  • Unit of Measure
  • Kilograms/Kilograms
  • Price
  • 155 INR
Product Description

We provide high quality Hardox 500 Sheets & Plates that is used in the industry for the fabrication of many light weight heavy duty products that exhibit increased impact and abrasion resistance. This is widely demanded as it has excellent load bearing capacity, longer service life, toughness, etc. Further, its excellent cold rolling/bending capabilities, makes it perfect to make a number of precision engineering products. This Hardox 500 Sheets & Plates can be availed in different specifications according to your application specific needs.

Hardox 500 is an abrasion resistant steel with a nominal hardness of 500HBW. Typical applications are components and structures subject to wear.

 Available dimensions :

  • Hardox 500 is available in thicknesses of 4.0 - 103mm. Hardox 500 Tuf is available in thicknesses of 4 - 65 mm.
  • Both grades are available in widths up to 3350 mm and lengths up to 14630 mm.
Mechanical Properties

Thickness mm

Hardness HBW min max

Typical yield strength Mpa, not

guaranteed

04/01/32

470 - 530

1250

(32) - 103

450 - 540

1250

Brinell hardness, HBW, according to EN ISO 6506 - 1, on a miled surface 0.5 3 mm below surface. At least one test specimen per heat and 40 tons . The nominal material thickness will to deviate more than 15mm from that of the test specimen.

The plate are through - hardened to a minimum of 90% of the guaranteed minimum surface hardness.

Details

Impact properties

Hardox 500

Hardox 500 Tuf

Transverse test, guaranteed

Longitudinal test, typical

Impact energy (j) for transverse tests Charpy V 10 * 10 mm test specimen

-

27 J/0°C

37 J/40°C

 For thicknesses between 6 - 11.9mm subsize Charpy V-Specimens are used. The specified minimum value is then proportional to the cross-sectional area of the test specimen. Compared to a full - size specimen (10*10mm). Impact testing according to ISO EN 148 per heat and thickness group. Average of three tests. Single value minimum 70% of specified average. Impact test is performed from 6 mm .

Chemical Composition (Heat Analysis)

C

S

Mn

P

S

Cr

Ni

Mo

B

0.3

0.7

1.6

0.02

0.01

1.5

1.5

0.6

0.01

Maximum Carbon equivalent CET (CEV)

Thickness mm

-(5)

5-(10)

10-(20)

20-(40)

40-103

CET (CEV)

0.34 (0.49)

0.36 (0.52)

0.43 (0.64)

0.45 (0.66)

0.47 (0.75)


Formula :

Formula
Details

Tolerance :

More details are given in SSAB's brochure 41-General product information Strenx, Hardox, Armox and Toolox-UK.

Thickness :

  • Tolerances according to SSAB''s thickness precision guarantee AccuRollTech.
  • AccuRollTech meets the requirements of EN 10 029 Class A , but offers narrower tolerances.

Length and width :

  • According to SSAB's dimension program
  • Tolerances conform to EN10 029

 Shape : Tolerances according to EN 10 029

Flatness : Tolerances according to SSAB's flatness tolerances which are more restrictive than EN 10029 Class N (steel type L).

Surface properties : According to EN 10163-2, Class A Subclass 1.

Delivery Condition :

  • The delivery condition is Quenched. The plate are delivered with sheared or thermally cut edges. Untrimmed mill edges available by agreement.
  • Delivery requirements can be found is SSAB's brochure 41-General product information strenx, Hardox, Armox, and Toolox-UK.
  • Fabrication and Other Recommendations Welding , bending and machining
  • Recommendations can be found in SSAB's brochures on www.hardox.com or consult Tech Support, techsupport@ssab.com.
  • Hardox 500 and Hardox 500 Tuf are not intended for further heat treatment. It has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition cannot be retained ofter exposure to temperatures in excess of 250°C.
  • Appropriate health and safety precautions must be taken when welding, cutting , grinding or otherwise working on this product . Grinding especially of primer coated plates, may produce dust with a high particle concentration.
Trade Information
  • Payment Terms
  • Letter of Credit at Sight (Sight L/C), Letter of Credit (L/C), Cheque, Cash in Advance (CID), Cash Advance (CA)
  • Main Export Market(s)
  • Asia
  • Main Domestic Market
  • All India
  • Certifications
  • mill test certificate

MANIBHADRA METAL & TUBES
X